This idea came to me while I was trying to think of a quick, no fuss, raw edge design for a throw pillow. If you're a quilter, then you should have all the materials necessary to make these. It's time to dive in your scrap bins!
Meet the Eye Spy Monster Pillow! This is a kid-friendly project. Let them help you dig through your scrap bin for bits of fabrics that tickle their fancy. To make an extra special version, fussy cut the scraps. Use a colorful printed fabric for your foundation for another layer of fun!
This simple, raw edge pillow is a new favorite of my kids. It provides lots of texture appeal and motor activity when they lift the flaps and look for the rest of the picture.
In this tutorial I used a plain fabric for the foundation to simplify my pictures and let you see better the lines I marked. I recommend using a printed fabric for the foundation to add more visual interest for the kids.
Named the "Monster Pillow" by my son because it reminds him of "monster fur."
Muslin or solid fabric for foundation and closure
20" pillow form
Basic sewing supplies
From your muslin or solid fabric cut:
3 squares, 20 1/2" x 20 1/2"
From your fabric scraps cut:
90 rectangles, 4" x 2"
Assembling the Top
1. Use 1 of the 20 1/2" squares as your pillow foundation. Use a pencil or fabric pen to mark a seam line 1/4" from the outside on 3 sides.
2. Rotate the pillow foundation upright. The top is the side with no seam line marked. Beginning from the bottom seam line, use your pencil or fabric pen and ruler to mark a line 4" away. From the 4" line, continue to mark 7 more lines. Space them every 2".
3. Begin sewing the scrap rectangles to the bottom of the pillow on the 4" line. Make sure the first rectangle for each line begins at the 1/4" seam line. Once the bottom line is full, continue upwards to the next line until the entire pillow front is covered. You will have room for 10 rectangles on each line.
4. Sew the final row of scrap rectangles along the top of the pillow foundation using an 1/8" seam. This will hide the seam when you assemble the pillow.
Assembling the Pillow
1. Take your 2 remaining 20 1/2" squares and fold 1 side on each of them over 6". These will be used to create your backing. Press to create a crisp seam. If you wish to decorate one of the closure edges with trim, now would be the time to do so.
2. Pin the scrap rectangles along the bottom and side edges toward the center to prevent them from being sewn in a seam.
3. Layer your pillow top and 2 folded backing squares right sides together by aligning the raw edges. If you decorated the edge of one of the closures put that one on your pillow top first. Pin around the edges to hold everything in place.
4. Sew a 1/4" seam around the entire pillow. Snip the 4 corners to create sharp points and turn the pillow inside out.
5. Insert your pillow form and enjoy!
If you enjoyed this tutorial and make a pillow to share with your kids (or friends!) please join and post a picture to the I'm Just A Guy Who Quilts "I Made It" Flickr group.
This tutorial is copyright 2011 by Ryan Walsh Quilts. All rights reserved. Please do not make items to sell using this tutorial. Please give me the proper credit if you post pictures of items made using this tutorial.